Heating Diagnostics & Inspection in Buford & North Georgia
Heating diagnostic in Buford and the surrounding communities: find what failed and why, quote before work, honest repair-or-replace answer. Call (770) 265-8308.
A heating diagnostic is a visit where a Southeast technician finds out why your furnace, heat pump, or heat strips aren't working, then gives you a quote or a straight repair-or-replace answer. We serve Buford and the surrounding communities.
It isn't a tune-up and it isn't a sales call. It's the step that turns “my heat isn't working” into a specific part, a specific cause, and a price you can say yes or no to. Call or text (770) 265-8308 to schedule.
What is a heating diagnostic visit?
Southeast has three kinds of heating visits, and it helps to know which one you're booking.
- Diagnostic ($79). Something is wrong, or you want the system inspected. A technician tests the equipment, identifies the fault, and quotes the repair before doing any work. This page is about that visit.
- Tune-up ($49 promotional, or a Family Plan visit). The system works and you want it checked and cleaned before the season. That's heating maintenance.
- Free replacement estimate. Replacement is already on the table and you want options and a price. That's a comfort consultant visit, not a technician visit, and it's covered on our heating replacement page.
A diagnostic often leads to one of the other two. If the system is healthy, we'll say so. If it's at the end of the road, we'll say that too and set up the free estimate.
When do you need a diagnostic instead of a tune-up?
Book a diagnostic when any of these is true:
- The heat isn't working, or it's working badly: cool air, short cycling, weak airflow, an iced outdoor unit, a tripping breaker, new noises, or a burning smell that doesn't clear.
- The system runs, but you don't trust it. It's older, it's had repeated repairs, or you bought the house without any service records and want a real inspection before winter.
- You've been told you need a new system and want an independent look at whether that's true.
- Your power or gas bill jumped and the weather doesn't explain it.
A tune-up is for a working system. A diagnostic is for a question. If you're not sure which you need, tell the office what's going on and they'll book the right one.
What does the $79 diagnostic cover?
The technician starts by listening. What you've noticed, when it started, and what the thermostat has been doing tell us where to look first. Then we test, depending on the equipment:
Gas furnace
- Electrical readings at the blower motor, the capacitor (the part that gives the motor its starting kick), and the control board, plus any stored error codes.
- The ignition sequence: the inducer motor that clears exhaust, the pressure switch that confirms it, the hot surface ignitor, the gas valve, and the flame sensor signal.
- Safety controls: the limit and rollout switches that shut the burners off if the furnace overheats.
- Gas pressure, where it applies.
- A visual inspection of the heat exchanger for cracks or corrosion.
- Temperature rise and airflow, including the filter and the blower wheel.
Heat pump
- Outdoor unit operation in heating mode, including the reversing valve (the part that switches between cooling and heating) and the defrost cycle.
- Refrigerant pressures and temperatures, to catch a low charge or a restriction.
- Capacitor, contactor (the switch that powers the outdoor unit), and outdoor fan motor.
- Sensors and the defrost control board.
Electric heat strips
- Each element and the sequencer that stages them on.
- Amperage draw, breaker, and limit switch.
- Whether the strips are running when the heat pump should be.
On every system we check the thermostat, the low-voltage wiring, and the condensate drain. At the end you know what failed, why it failed, and what the repair costs. You decide before any work starts. Our Learning Center has a longer write-up on what the $79 diagnostic covers.
What can a heating inspection find?
When the question is “is this system safe and worth keeping?” rather than “why did it stop?”, the same visit becomes an inspection. The things we're looking for:
- Safety problems. A cracked heat exchanger, a gas leak at the valve or fittings, or exhaust that isn't venting properly. Any of these means the furnace shouldn't run until it's fixed, and we'll tell you so directly.
- Airflow restrictions. Clogged filters, a dirty blower wheel, collapsed or disconnected ducts, or a coil coated in dust. These cause overheating, short cycling, and uneven rooms.
- Parts on their way out. A capacitor reading below its rating, a motor drawing high amps, or a flame sensor with a weak signal. Better to know in October than in January.
- Installation problems. Wrong-sized equipment, gas pressure that was never set, a heat pump charged by guess. A newer system can be installed so poorly that replacement is the better long-term option.
- Heat strips carrying the load. If the strips are running more than they should, the heat pump has a problem and your electric bill is paying for it.
How does Southeast turn findings into a repair-or-replace answer?
We don't use age alone, and we don't use a percentage rule. After the diagnostic we weigh:
- What the repair costs and whether it actually restores reliable operation.
- How well the system was installed in the first place.
- The overall condition of the equipment and what's likely to fail next.
- Warranty coverage and whether parts are still available.
- Comfort, humidity, airflow, and noise problems a repair won't fix.
- Whether the system is sized correctly and matched to your ductwork.
- How long you plan to stay in the home and how you'd rather pay.
Most of the time the answer is a repair. When it isn't, we explain why, and we set up a free replacement estimate so you can see real options and numbers. Our guide to repairing or replacing your HVAC system walks through the same logic in more detail.
What does a diagnostic cost, and what happens after?
- $79 for the diagnostic visit. It's typically charged. Any waiver is a case-by-case customer-service decision, and we don't advertise one. The office discloses the fee when you book.
- Repairs are quoted after the diagnosis and before the work. We don't publish repair prices because the price depends on the part and the system. See heating repair for what those visits look like.
- Southeast Family Plan members get priority service, 15% off qualifying repairs, and no after-hours charge. The plan is $149 a year for the first system and $109 for each additional one.
- After-hours visits for non-members may carry an additional charge, which the office confirms before dispatch.
- If replacement is the answer, the estimate is free and financing through Service Finance starts at $59 a month for a heating system with credit approval; see financing terms.
We try to answer calls 24/7 and aim to respond within 24 hours, though arrival depends on demand, weather, location, and the problem.
Where does Southeast run heating diagnostics?
From the Buford office across Buford, Sugar Hill, Suwanee, Flowery Branch, Dacula, Braselton, Hoschton, and Cumming, with Gainesville and Alpharetta as regular stops. Edge markets such as Oakwood and Peachtree Corners depend on capacity and the job, and we'll be straight with you about timing. Southeast is family owned and locally owned, founded in 2022, owned by Phillip Suggs and Brian Malone, holds Georgia license CR110452, and services all major HVAC brands. See the full heating services lineup.
Book a heating diagnostic
Book service online, or call or text (770) 265-8308. Our office will call or text to confirm the appointment.
Frequently asked questions
How much is an HVAC diagnostic? +
What's the difference between a diagnostic and a tune-up? +
Should I repair or replace my HVAC system? +
Can a newer HVAC system still need replacement? +
Do I have to approve the repair before you do it? +
How quickly can Southeast get someone to my house? +
Ready to get comfortable again?
Book your service online, or call now for emergency help. Our Buford-based team is ready when you are.
